Wizard Elegance IP
TECHNICAL INFO
All technical info regarding Elegance IP can be found on this page: downloads | dimensions | extensions.
DIMENSIONS:
Due to its slim design, the Wizard Elegance is only available as a surface-mounted model.
Height: 191 mm | Width: 142 mm | Depth: 35 mm
EXTENSIONS:
2 WIRE INVERTER
Do you need to connect an IP videophone, IP camera, computer,… or whatever else to the network and you don’t have the right network cabling? Our new two-wire inverter FTPOE2W offers the solution!
This module transforms any two-wire or coax connection into the perfect cat5 network cable. You don’t even have to power the transmitter if you have a PoE switch. The PoE is transported together with the data over the old cabling.
You can connect as many pairs to your network as you wish: the modules will not interfere with each other or others and the IP addresses are assigned fully automatically.The distance that can be bridged is a maximum of 500 meters. The module can therefore also be used if you have cat 5 lying around but need to go further than the traditionally permitted 90 meters.
FT29X-SJABL
– 1 to 4 pushbuttons with all possible house numbers
– 1 to 4 pushbuttons with code keyboard
– most common button designations: reception, deliveries, office, warehouse,…
FT4SWIP
This IP-based Input/Output module greatly expands the capabilities of the Wizard. It allows you to use your phone and optional keypad to create 4 additional controls. The FT4SWIP is thus needed when you need to be able to control multiple ports independently. External IP cameras are also integrated via this module.