Wizard Bronze IP

TECHNICAL INFO

Toutes les informations techniques concernant le Bronze IP sur cette page : téléchargements | dimensions | extensions.

DIMENSIONS:

SMALL MODEL:

Height: 365 mm | Width: 160 mm

Recess to be provided:
Height: 332 mm | Width: 135 mm | Depth: 62 mm

BIG MODEL:

Height: 525 mm | Width: 160 mm

Recess to be provided:
Height: 332 mm | Width: 135 mm | Depth: 62 mm

EXTENSIONS:

2 WIRE INVERTER

Do you need to connect an IP videophone, IP camera, computer,… or whatever else to the network and you don’t have the right network cabling? Our new two-wire inverter FTPOE2W offers the solution!

This module transforms any two-wire or coax connection into the perfect cat5 network cable. You don’t even have to power the transmitter if you have a PoE switch. The PoE is transported together with the data over the old cabling.

You can connect as many pairs to your network as you wish: the modules will not interfere with each other or others and the IP addresses are assigned fully automatically.The distance that can be bridged is a maximum of 500 meters. The module can therefore also be used if you have cat 5 lying around but need to go further than the traditionally permitted 90 meters.

EKEY FINGER SCANNER

A finger scanner is discreetly mounted on the back. It is therefore at the same level as the front plate.

FTPROXI

Like the FTEKEY, the optional proxile reader is mounted seamlessly with the front plate from the rear.
Only 26x26mm!

FT4SWIP

The FT4SWIP is needed when you need to be able to control multiple ports independently. This module also increases security: after all, the relays are inside.
Through its inputs, this module shows the status of multiple ports (open/on) on both the
VISITOR! and our app.

OPTION FTNAME

Fasttel can provide your Wizard Bronze IP with coloured name and house number engraving. This in font and colour of your choice. Even logos are possible

MADE-TO-MEASURE AND LETTERBOXES

The models shown here are all stock items. However, if you require special dimensions, customisation is
no problem at all. Fasttel also effortlessly processes your own equipment such as QR or badge readers, finger readers, letterboxes, etc..