Doorphone Entry kits & outdoor station
TECHNICAL INFO
All technical info regarding Doorphone Entry on this page: downloads | dimensions | extensions.
This video kit can be installed by literally anyone: the FT600 Doorphone Entry is fully pre-configured: you just need to connect everything out of the box. Nothing can or needs to be programmed, except the access codes.
DIMENSIONS:
The outdoor unit FT600 and FT600K can be installed both in and on the wall using 1 and the same container.
Overall dimensions: 216x116x31 (HxWxD)
Recess to be provided for recessed model: 202x102x31 (HxWxD)
EXTENSIONS:
2 WIRE INVERTER
Do you need to connect an IP videophone, IP camera, computer,… or whatever else to the network and you don’t have the right network cabling? Our new two-wire inverter FTPOE2W offers the solution!
This module transforms any two-wire or coax connection into the perfect cat5 network cable. You don’t even have to power the transmitter if you have a PoE switch. The PoE is transported together with the data over the old cabling.
You can connect as many pairs to your network as you wish: the modules will not interfere with each other or others and the IP addresses are assigned fully automatically.The distance that can be bridged is a maximum of 500 meters. The module can therefore also be used if you have cat 5 lying around but need to go further than the traditionally permitted 90 meters.
HOLLOW WALL MOUNTING FRAME
FT600HW
Hollow wall mounting frame for FT600 Inox 3mm
TABLE STAND FOR FT600W
FT600BS
Desk/Table stand for FT600W 7″ monitor
ELITE FRAME
COLUMNS FOR FT600
Beautiful slim registration columns for the FT600.
With its height, it is ideal for trolleys or at barriers.
The column is powder-coated RAL9005
FT600UPGR
FT600WPS
POE adaptor for FT600W