Fasttel has been known as the supplier of Door Entry Systems for 40 years. Recently we have developed a new product which is a welcome addition to our portfolio and can be installed by almost anyone.

We wanted to develop a system that can be programmed completely web-based and we succeeded. Names/cards/locks/readers are all digitally assignable.

Fasttel combines various techniques from card readers to finger readers and in the near future also the eye scan. The Fasttel Wiegand readers from our intercoms are of course compatible with this system. The Fasttel DAS is designed on the latest structure with an IP & RS485 interface,

We have carried out the 4 most important operating functions on the basis of LEDs.
Is the 230 Volt available
Is the emergency power connected
Is the emergency power not EOL
Is the secondary power operational



Fasttel Door Access System (DAS) controller 2 doors incl. 2 x FT9101 reader


Fasttel Door Access System (DAS) Controller for 4 doors incl. 4 x FT9101v reader

Furthermore, the controllers can of course also be ordered separately.


Linkable card readers: Wiegand readers
Input interface: 4 alarm inputs, Door Magnetic×4, Door Switch×4, Case Input× 4, Tamper proof×1;
Output interface: Door Switch Relay×4, Alarm Relay×4
Uplink Communication Interface:TCP/IP Network Interface and RS-485 Interface
Memory: 10,000 cards and 300,000 events


32-bit high-speed processor
TCP/IP network communication, with self adaptive network interface. The communication data is encrypted to ensure data security.
The recognition and storage of card number with up to 20 digits
Store of 50,000 events
Supports first card function, super card and super password function.
Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), short circuit attempts alarm and open circuit attempts alarm.
Supports zone alarm input

Supports Wiegand interface to access card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-party card reader with Wiegand interface.
Supports various card types such as normal / blocked / blacklist / patrol / guest / duress / super card, etc.;
Different indicators to show different device status
Supports time synchronization via NTP, manual or automatic method
Watchdog to perform status detection of the device.
Data can be saved permanently when controller is powered off

CALL US: +32 9 244 65 20